The MX series of amplifiers proves that amazing things do come in small packages. Designed to fit, without compromising power and sound quality.
The MX series slim mount subwoofers are designed to deliver even deeper, more accurate bass in tight environments. Perfect for installations where depth is limited, and a small enclosure is needed.
The MX Series of Full Range Speakers feature a Dual Concentric Coaxial Design which allows the sound of each driver to emanate from a single point, eliminating frequency interference and phase issues.
RX2 series amplifiers are the reference for style and value in any installation. Built with the legendary Phoenix Gold reliability, they feature heavy duty heatsinks, robust unregulated power supplies, and oversized direct input power and speaker terminals.
RX2-series subwoofers are designed to give high performance at a great value. They feature long wound 2.0” coils which allows for 25mm of peak to peak excursion. This results in an ability to create deep, accurate bass in vented or sealed enclosures.
The RX series of components and coaxials utilizes a high performance midbass driver that is acoustically matched to a quality Mylar dome tweeter via a passive crossover.
Because you NEED 1000 watts
Power your subs with precision. RX2 1000.1 monoblock amplifier drives clean power with efficiency to your subwoofer. When your jam comes on, sometimes it calls for taking your bass up to the next level; and with RX2 1000.1's bass knob you can. Installed near the driver, simply turn it up and enjoy.
RX2 series amplifiers are the reference for style and value in any installation. Built with the legendary Phoenix Gold reliability, they feature heavy duty heatsinks, robust unregulated power supplies, and oversized direct input power and speaker terminals. They also sound sweet thanks to the audiophile-grade output transistors. We made upgrading your stock system easy by allowing high level inputs, so you can keep that hard to replace radio, and still upgrade the sound. RX2-series amplifiers are ready to impress with their effortless ability to provide power and clarity while keeping the chassis at a convenient size for any installation. The devil is in the details, so it just made sense that we allow the PG name plate to be removed and turned to match the orientation you might need for your install because we know you're going to want show off your system and make all your friends jealous.
RMS Power Ratings listed at less than 1% THD @ 14.4v
|Number of Channels:||1|
|4Ω: CH 1||400W x 1|
|2Ω: CH 1||700W x 1|
|1Ω: CH 1||1000W x 1|
|Total RMS Power (Sum of rated power):||1000W|
|CH 1||40Hz - 200Hz @ 12dB / Oct Linkwitz Riley|
|Subsonic||10Hz - 40Hz @ 12dB / Oct Linkwitz Riley|
|Input Channels:||2CH L/R|
|Input Mode:||Unbalanced / Balanced|
|Input Sensitivity:||.2v - 5v Unbalanced Low-Level RCA|
|.5v - 15v Balanced Hi-Level Harness|
|Processing:||Bass Boost 0dB / +6dB / +12dB @45hz|
|Signal to Noise (@ CEA Standard):||>70dB|
|Frequency Response: Full Range||CH1 15Hz - 250Hz|
|Heatsink Type:||Extruded Aluminum|
|Operating Voltage:||8V to 16V|
|Switchable Auto-Turn On:||No|
|Power Supply Type:||Unregulated|
|Power Terminals:||4 Gauge|
|Speaker Terminal:||10 Gauge|
|On-Board Fusing:||3 x 35A ATC|
|Recommended Inline Fuse:||100A|
|Dimensions (L x W x H):||11.81” x 8.11” x 1.98” - 258mm x 150mm x 48.5mm|